FEATURED AUCTION | ONLINE | DATE: MAY 17TH – MAY 24TH, 2018 @ 11am EDT
LOCATION: 1080 River Avenue, Pittsburgh, PA 15212
(NOTE: Maximum Capacity for Double Shift (18 Hrs.) is (4) Truck Loads or 170,000 lbs.)
Vanmark Corp S/S 8 ft L x 5 ft W x 48″ D Vegetable Receiving Hopper with 14″ S/S Bottom Auger
Vanguard 12 ft H x 24″ W S/S Vertical Power Transfer Auger, with 58″ L x 24″ W Bottom Hopper & Top Mounted Chute
Vanguard Corp. S/S Vegetable Pump System with 5 ft L x 6 ft W x 54″ D S/S Hopper Includes Cornell 50 hp Centrifugal Pump
Custom Fabricated S/S Vegetable Hydraulic Dump Hopper /Bin Elevator System, Includes 52″ W x 48″ D x 75″ H Dump System with 3 hp Hydraulic Pump with Reservoir, 7 ft W x 7 ft L x 5 ft D S/S Feed Bin with Side Pneumatic Gate,18 ft L Auger Conveyor System with 18″ S/S Power Feed Auger with Electric Drive Motor with S/S Frame
Key 7 ft. L x 30″ Vibratory Dewatering / Fines Removal / Shaker Conveyor, Includes 2 – Level Screen, Mounted on 4 ft. H S/S Frame
Vanmark Peeler / Scrubber / Washer, S/N 027457044099902, with (8) Roller Positions, S/S Paddle, All Hydraulic Driven, Water Spray Heads, S/S Enclosed Covers, Mounted on S/S Frame, Infeed Chute, Includes 25 hp Hydraulic Pump with Reservoir
3 – Level S/S Support & Operators Platform, (Measuring – 23 ft L x 10 ft 9″ W & 4 ft W x 8 ft 7″ to 12 ft H), with 4″ x 4″ Supports, Mostly Welded Constructed, Stairs, Plastic Grating, Handrail, (Vanmark Peeler & Key Shaker Deck Support & Operators Platform)
42 ft S/S Inclined Conveyor System, with 23″ W Belt with 12″ Flights, 5 hp / 1745 RPM Electric Drive Motor, S/S Sides, S/S Leg Supports up to 14 ft 10″ H, 208/230/460V 3 Phase
Odenberg All S/S Vegetable Steam Peeler, S/N 91015, 11 ft. H x 5 ft. W x 9 ft. L Chamber, SEW 5 hp 1660 RPM Drive Motor, 300 psi @ 500 Degrees, with Controls, Also Includes Top Mounted S/S Feed Hopper on Load Cells with Digital Read Out, 14 Ft Bottom Mounted S/S Auger Conveyor System, Mounted Operators Platform, (Overall Dimension 10 ft. W x 9 ft. L x 13 ft. 4″ H or 18 ft. H to top of Feed Hopper)
Vanmark Peeler / Scrubber / Washer, S/N 027457044099901, with (8) Roller Positions, S/S Paddle, All Hydraulic Driven, Water Spray Heads, S/S Enclosed Covers, Mounted on S/S Frame / Operators Platform, Infeed & Outfeed Chute, Includes Parker 25 hp Hydraulic Pump with Reservoir
Vanmark Peeler / Scrubber / Washer, S/N 027457044099903, with (8) Roller Positions, S/S Paddle, All Hydraulic Driven, Water Spray Heads, S/S Enclosed Covers, Mounted on S/S Frame, Infeed Chute, Includes Parker 25 hp Hydraulic Pump with Reservoir
All S/S Vertical Auger Conveyor System, with 24″ S/S Auger & Electric Drive Motor, 58″ W x 22″ x 26″ D Bottom Mounted S/S Hopper
Key 16 ft L x 36″ W All S/S Vibratory Shaker Deck, Mounted on 2 ft H S/S Frame, Includes 16 ft 6″ L x 93″ W x 7 ft H S/S Operators Platform with Stairs & Plastic Grating
Key 13 ft L x 30″ W All S/S Vibratory Shaker Deck, Mounted on 2 ft H S/S Frame, Includes 15 ft L x 11 ft 8″ W x 6 ft 3″ H S/S Operators Platform with Stairs & Plastic Grating
Urschel Dicer, Model GA, S/N 2393, with 19″ x 15″ S/S Feed Hopper & 18″ H Frame Support
2008 Key Tegra 60″ In-Air Digital Color Sorter, Model 7775-604219-1, SN 08-199029 with (4) Cameras, PLC Controls with Touchpad Display, 480V 3 Phase
2008 Key 8 ft 4″” L x 53″” W All S/S ISO – FLO Vibratory Dewatering / Fines Removal / Shaker Conveyor, Model 604219-2, SN 08 -199030, with 4 – Levels with (2) S/S Screens, Mounted on 4 ft 10″” H S/S Frame, Includes Bottom Mounted S/S Drain Hopper, (In-Feeding Tegra Sorter)
16 ft L Inclined S/S Belt Conveyor System with 24″” W Belt, 1 hp Electric Drive Motor, S/S Side Rails, up to 3 ft H Leg Supports, (Out-Feeding Tegra Sorter)
Key Line Pump System with 24″ L x 19″ W x 18″ D S/S Hopper with 7.5 hp / 1750 RPM Centrifugal Pump with 4″ x 4″ Line Connections, 208/230/460 V 3 Phase, Mounted on S/S Frame with Square D Switch
Key S/S 18″ W x 34″ L x S/S Rotary Drum Screen / Fume Tank, with Electric Drive Motor, S/S Frame & Square D Switch
Chapman Corp. 14 ft 4″ H x 9 ft 6″ W x 9 ft 6″ L x All S/S Cone Bottom Vegetable Accumulation Hopper, Order No. 05362, Project No. 51448, Mounted on Weigh-Tronix Digital Load Cells with SAI Model 530 Digital Read-Out, 6 ft L Dual Bottom Auger Conveyor with Electric Drive Motors, S/S Support Legs, 4 ft 7″ L Infeed Separator Chute, Top Sprayer Manifold, (Interior Diam. 8 ft 5″W x 8 ft 5″ L x 10 ft 4″ H), (North System)
Chapman Corp. 14 ft 4″ H x 9 ft 6″ W x 9 ft 6″ L x All S/S Cone Bottom Vegetable Accumulation Hopper, Order No. 05362, Project No. 51448, Mounted on Weigh-Tronix Digital Load Cells with SAI Model 530 Digital Read-Out, 6 ft L Dual Bottom Auger Conveyor with Electric Drive Motors, S/S Support Legs, 4 ft 7″ L Infeed Separator Chute, Top Sprayer Manifold, (Interior Diam. 8 ft 5″W x 8 ft 5″ L x 10 ft 4″ H), (South System)
U – Shaped S/S Operators Platform, (23 ft W x 23 ft L x 4, 7 & 8 ft W x 12 ft H), Mostly Welded Constructed with Plastic Grating, (2) Sets of Stairs with Handrails & Leg Support, (Note: Surrounds Accumulation Hopper System)
Key Line Pump System with 42″ L x 34″ W x 21″ D S/S Hopper with Cornell 60/50 hp / 1770/1460 RPM Centrifugal Pump with 6″ x 6″ Line Connection, 208/230/460 V 3 Phase, Mounted on S/S Frame with Square D Switch
Key Line Pump System with 42″ L x 34″ W x 21″ D S/S Hopper with 30 hp / 1760 RPM Centrifugal Pump, Model 6NHP-F6K, 208/230/460 V 3 Phase, Mounted on S/S Frame with Square D Switch
Key S/S 18″ W x 34″ L x S/S Dual Rotary Drum Screen / Fume Tank with Electric Drive Motor, Sprayer, 36″ H S/S Frame & Square D Switch
Key S/S 18″ W x 34″ L x S/S Dual Rotary Drum Screen / Fume Tank with Electric Drive Motor, Sprayer, 36″ H S/S Frame & Square D Switch
Heliarc S/S 24″ W x 48″ L x S/S Rotary Drum Screen / Rotostrainer, Model RSA2548-1, S/N 310003, #2548-1X020, with SEW Drive Motor
Key Line Pump System with 24″ L x 19″ W x 18″ D S/S Hopper and 7.5 hp Centrifugal Pump with 4″ x 6″ Flanged Connections
Rietz 10 ft Thermascrew Vertical S/S Power Auger Conveyor System, Model TLT16-K2210, SN T-681953, with 15″ S/S Auger & Electric Drive Motor & Bottom S/S Feed Hopper
Galfab 20 Cubic Yard Enclosed Waste Container, Model OS2244, SN 2515, with Top Mounted Hinged Door &Top Mounted Power Auger, (Box Diam. 22 ft L x 7 ft W x 64″ H)
Custom Designed ~30 ft. L x 5 ft. W x 29″ Deep All S/S Fruit & Vegetable Washer / Immersion Wash System, Includes 53″ W Cleated S/S Conveyor with Flights & 12 ft Extended Inclined with Electric Drive, Hydraulic Level System with 3 hp Hydraulic Pump, S/S Chute, (Overall Dimension ~42 ft L x 65″ W x 42″ H up to 140″ H)
~11 ft. L x 34″ W S/S Belt Conveyor System with Dura Drive Roller Drive System, Mounted on 53″ H Leg Supports, with Square D Safety Switch
~13 ft. L x 11 to 14 ft. W S/S Vegetable / Fruit Receiving Hopper with Safety Guard, with 14 ft. L x 16″ W Bottom Chain Driven Conveyor System with 12″ Dividers
Lyco Peeler / Washer, Model 11000, S/N 110509919, with (11) Roller Positions, S/S Screw Auger, All Hydraulic Driven, Water Spray Heads, S/S Enclosed Covers, Mounted on S/S Frame with Mounted Operators Platform Includes Parker 30 hp Hydraulic Pump with Reservoir
Lyco Peeler / Washer, Model 11000, S/N 052990819, with (11) Roller Positions, S/S Screw Auger, All Hydraulic Driven, Water Spray Heads, S/S Enclosed Covers, Mounted on S/S Frame with Mounted Operators Platform includes Parker 30 hp Hydraulic Pump with Reservoir
~8 ft. 5″ S/S Inclined Belt Conveyor System with 20″ W Belt with Flights & Siderails, (Note: Power Roller Missing), Mounted on up to 90″ H Leg Supports
~8 ft. L Conveyor System with 18″ W Intralox Conveyor with Flights, Side Rails & Electric Drive, Mounted on 79″ H Legs
~11 ft. L Belt Conveyor System with 34″ W Belt, Dura Drive Power Roller Driven, Side Rails, Mounted on 55″ H Leg Supports
~8 ft. L x 3 ft. W 2 – Level S/S Inspection / Operators Platform, 18″ & 11″ H with Plastic Grating & Handrail
Odenberg 25 ft. L S/S Inclined Belt Conveyor / Hopper System with 23″ W Belt, 19″ Flights, Side Rails, 75″ W x 78″ Bottom Mounted Hopper, Top Chute, SEW Electric Drive & Square D Switch
Lyco Peeler / Washer, Model 11000, S/N P039811428I, with Set up for (9) Roller Positions, (Note: Brushes Removed), S/S Screw Auger, All Hydraulic Driven, Water Spray Heads, S/S Enclosed Covers, Mounted on S/S Frame with Mounted Operators Platform
Lyco Peeler / Washer, Model 8000, S/N 07309610603, with (8) Roller Positions, S/S Screw Auger, All Hydraulic Driven, Water Spray Heads, S/S Enclosed Covers, Mounted on S/S Frame with Mounted Operators Platform
16 ft. L S/S Inclined Conveyor System, with 24″ W Intralox Belt with 8″ Flights, Siderails, SKK Drive, up to 65″ H Leg Supports
13 ft. L S/S Inclined Conveyor System, set up for 16″” W Belt, (Note: Belt Missing), Siderails, Drain Pan, SKK Drive, up to 103″” H Leg Supports
Key 22 ft. 9″ L S/S Conveyor System, with 26″ W Intralox Belt with 8″ Flights, Drain Pan, Electric Drive, 52″ H S/S Leg Supports & Square D Switch
S/S Inclined Belt Conveyor System with 18″ W Belt with 6″ Flights, Siderails, Drain Pan, Variable Speed Electric Drive, up to 93″ Leg Supports
~16 ft, L x 34″ W x 17″ H S/S Inspection / Operators Platform with Plastic Grating & Handrail
Urschel Dicer, Model HS, S/N 449, 2 hp 1730 RPM Motor, 230/460 V 3 Phase with 23″ x 20″ Feed Hopper & 66″ H Frame Support
Key ~14 ft. L x 36″ W S/S Vibratory Dewatering / Fines Removal / Shaker Conveyor with Electric Vibrator Motor, Sprayer System, Drain Pan, 50″ H Support Frame & Square D Switch
~22 ft. 9″ L S/S Inspection Conveyor System, with 35-1/2″ W Belt with Lane Divider, Electric Drive, 50″ H S/S Leg Supports & Square D Switch
~18 ft. 9″ Inclined Screw Auger Conveyor System with 18″ All S/S Auger, 5 hp / 1680 RPM Electric Drive Motor, 230 / 460 V 3 Phase, Top Covers, with Leg Supports
Rietz ~20 ft. L x 30″ W x 35″ D Single Screw Steam Cooker / Blancher, Model TL-30-K2220, S/N TL-83001113 with 28″ S/S Screw Auger, Sterling 2 hp / 1725 RPM Variable Speed Electric Drive System, 208/230/460V 3 Phase, Hinged Top Covers, Steam Injection Manifold, Temp Sensor, Square D Switches, Mounted on 51″ H Operators Platform with Stairs
L&A ~20 ft. L x 7 ft. W x 38″ D Dual Screw Steam Cooker / Blancher, S/N 10297, with 36″ Dual S/S Screw Auger, Dual US Motors 5 hp / 1740 RPM Electric Drive Systems, 230/460V 3 Phase, Hinged Top Covers, Steam Injection Manifolds, Temp Sensor, Square D Switches with Mounted Operators Platform with Stairs
Langsenkamp 24″ S/S De-Pitter (Pulper), Model A, S/N T316SS, with 20 hp / 1760 RPM Drive Motor, 230/460V 3 Phase, (Note: Internal Screens / Components not Included)
Langsenkamp 24″ S/S De-Pitter (Pulper), Model A, S/N 206141S, with 20 hp / 1760 RPM Drive Motor, 230/460V 3 Phase, (Note: Internal Screens / Components not Included)
23 ft. S/S Belt Conveyor System with 24″ W Belt, Electric Drive, 26″ H S/S Leg Supports
28 ft. S/S Belt Conveyor System with 24″ W Belt, Electric Drive, 12″ H S/S Leg Supports, (Receiving Conveyor)
Heliarc S/S 36″” W x 53″” L x Rotary Drum Screen, Model 98020, S/N 010
Custom Designed 42″ All S/S Squash Cutter, with 10/7.5 hp Drive 1745/1425 RPM Drive Motor, Hinged Lid Top, Includes Bottom Drop Tapered Hopper, Inspection Doors with Safety Switches, 208/230/460V, 3 Phase
Custom Designed 42″ All S/S Squash Cutter, with 10/7.5 hp Drive 1745/1425 RPM Drive Motor, Hinged Lid Top, Includes Bottom Drop Tapered Hopper, Inspection Doors with Safety Switches, 208/230/460V, 3 Phase
~14 ft. 9″ L S/S Belt Conveyor System, with 33″ Belt, Bryant Electric Drive Roller, Side Rails, (Note: Mounted on Bottom of Squash Cutters – No Leg Supports Included)
~11 ft. 7″ L S/S Inclined Inspection Conveyor System, with 34″ W Belt with 18″ Flights, S/S Siderails, Sparks Dura Drive Power Roller, up to 36″ H Leg Supports & Square D Switch
~8 ft. 9″ L S/S Inspection Conveyor System, with 34 1/2″ W Belt with, S/S Siderails, SEW Electric Drive Motor, 29″ H Leg Supports & Square D Switch
~13 ft. L S/S Inclined Conveyor System, with 18″ W Intralox Belt with 12″ Flights, S/S Siderails, Electric Drive Motor, up to 5 ft H Leg Supports & Square D Switch
~13 ft. 9″ L S/S Inclined Conveyor System, with 18″ W Intralox Belt with 12″ Flights, S/S Siderails, Mounted S/S Hopper, Electric Drive Motor, up to 5 ft. H Leg Supports & Square D Switch
~20 ft. 6″ L S/S Inspection Conveyor System, with 34″ W Belt, S/S Siderails with Side Gate, Sparks Dura Drive Power Roller, up to 4 ft. H Leg Supports & Square D Switch
~28 ft. L S/S Inclined Inspection Conveyor System, with 34″ W Belt with 12″ Flights, S/S Siderails, Sparks Dura Drive Power Roller, up to 4 ft. H Leg Supports & Square D Switch
(3) pcs. – S/S Operators Platforms, Includes (2) ~6 ft. L x 30″ W x 22″ & 12″ H, ~8 ft. L x 36″ W x 5″ H, All with Plastic Grates
~22 ft. L S/S Inclined Conveyor System, with 34″ W Belt with 12″ Flights, S/S Siderails, Bottom Drain Pan, Sparks Dura Drive Power Roller, up to 8 ft. 6″ H Leg Supports & Square D Switch, (Feeding Squash Cutters)
~500 Gal Vertical Single Wall S/S Tank with Hinged Lid, S/S Legs, Rosemont Level Sensor, (Tank Dimension ~55 – 65″ H x 48″ W)
~500 Gal Vertical Single Wall S/S Tank with Hinged Lid, S/S Legs, Rosemont Level Sensor with Bottom Plug Valve, (Tank Dimension ~65″” H x 48″” W)
~500 Gal Vertical Single Wall S/S Tank with Hinged Lid, S/S Legs, Rosemont Level Sensor, (Tank Dimension ~85″ H x 42″ W)
~500 Gal. Vertical Single Wall Cone Bottom S/S Tank with Top Man Door, S/S Legs, Rosemont Level Sensor, (Tank Dimension ~67″ H x 48″ W)
(2) 6 ft. 4″” H S/S Tank Platform Stairs with ~30″” W x 24″” L Platform & Handrail
~7 ft. 6″ H S/S Tank Platform Stairs with ~30″ W x 24″ L Platform & Handrail
~7 ft. H S/S Tank Platform Stairs with ~30″ W x 24″ L Platform & Handrail
Ampco 5 hp Centrifugal Pump, Model DC2, with 2-1/2″ x 2″ Clamp Type S/S Head, Marathon 3460 RPM Motor, Mounted on S/S Stand
Ampco 15 hp Centrifugal Pump, Model DCH2, with 3″ x 2-1/2″ Clamp Type S/S Head, Baldor Motor, Mounted on S/S Stand
Ampco Aprox. 15 hp Centrifugal Pump, Model DCH2, with 3″ x 2-1/2″ Clamp Type S/S Head, Baldor Motor, Mounted on S/S Stand
~36″” x 36″” x 20″” D S/S Feed Hoper with 8″” Line Connection
L&A Engineering S/S Condensate Evaporator/ Condenser, S/N 10296, (Inside Product Dimension – ~6 ft. L x 64″ W x 100″ Deep ) includes 4″ S/S Coil Bundle, 15 hp Drive Motor with 1770 RPM, Duct Work, Rosemont Level Sensor, 230/460V 3 Phase, Includes S/S Operators Platform
Incline Conveyor Overhead Top-Mounted Water Spray Nozzles
S/S Dicer
KEY Key Water Reclaim / Filter Unit (Used to Remove Solids From Water Reclaimed From Mushroom Washing)
S/S Rotary Tumbler / De-Stoner, Equipped with Water Spray Nozzles
S/S Accumulation & Inspection Table
S/S Water Flume (Transports Product to Downstream Packaging and Processing)
S/S Water Bath
LARGE ASSORTMENT OF ADDITIONAL PACKAGING & PROCESSING EQUIPMENT TO BE ADDED SOON!
PLEASE CHECK BACK FOR ADDITIONAL INFORMATION!