Admix Inc. offers a wide range of sanitary equipment to suit all your mixing, blending, dispersion and particle size reduction needs whether you require in-tank batch processing, inline mixing & milling or powder induction. Ideal for rework, premixes, milk and whey powder, sweetened condensed milk, yogurt, processed cheese, cream cheese, ricotta cheese, ice cream, margarine, sugars, cocoa, gums, stabilizers and hundreds of other applications, the sanitary mixing and milling equipment complies with 3-A Standards.
Waukesha Cherry-Burrell’s shear pump offers a choice of interchangeable stators and rotors that make it extremely versatile by allowing the ability to texturize, emulsify, blend, reconstitute, suspend, disperse or polish a variety of food products. Variable speed drives may also be used to further adjust the shear and mixing affects. WCB’s colloid mill has shearing and mixing forces that produce controlled, highly sheared, uniform dispersions and stable emulsions. A range of product viscosity may be processed. Higher viscosity products are processed at lower flow rates to stay within the pressure limit. Typical applications include salad dressing, mayonnaise, and liquid egg homogenization.
The batch mixing processor is designed to cook, and if required, cool any pumpable food product. Standard sizes available in working capacities of 50, 100, 200, and 400 gal. Larger capacities attainable when filling full-to-brim. The key to quick, even cooking is the 30° pressure wall cone bottom that offers an impressive ratio of heat exchange surface to unit size. This steam jacket is manufactured entirely of heavy gauge stainless steel, spot welded to the inside liner. Now, for most processors, the main concern, in addition to rapid heat exchange, is for adequate and thorough blending without damage to particle size. The piggyback drive provides mixing and blending action to accomplish this end. The scraper agitator continuously scrapes the bottom revolving at a slow speed in a clockwise direction, while the tri-blade center agitator rotates in the opposite direction at a higher rate of speed. A stationary baffle is also employed to enhance agitation.
Chester-Jensen Company Inc.
Lightnin Enhanced Classic Line (ECL) portable mixers are strong and flexible, providing maintenance-free operation. All shaft bearings are sealed for life. Gears are synthetic grease lubricated for continuous lifetime service. Lightnin Series 10 Mixers deliver a superior combination of value and performance-long gear and bearing life, unique output shaft connection reduces shaft deflection to extend seal life, high-strength ductile iron motor pedestal.
Plenty Mixers TMH Series for storage, homogeneity, blending and prevention of sludge/bottom deposit build up for vegetable oils, palm oils, soybean oils, fatty acids, stearic acids, beers, wines, and soft drinks. Available as either a fixed-angle or swivel-angle mixer in one standard size, to suit a variety of markets and applications.
(44 1635) 42363
The Tetra Almix is a complete mixing solution designed to deal with the full range of powders, oils and liquids used in the making of modern dairy products. It solves any problem of lumping or fat separation to produce a homogenous product of superior quality. And it does the job in the most natural way possible, in a liquid-filled, high turbulent tank, with no introduction of air. At high speed, the rotor traps liquids and powders in a strong vortex, forcing the ingredients through the perforated stator at the optimal shear rate.
Tetra Pak Processing
The VacuShear liquid processor from A&B Process Systems is an excellent candidate for use in mixing and blending processes involving powders and liquids. This mixing technology is made available to the processing industries through the partnership between A&B Process Systems Stratford, Wis. and Admix Inc., Manchester, N.H. Mixing in enclosed vessels and in-line is an important activity in the chemical, pharmaceutical, bioresearch and food industries. The VacuShear processor, is capable of conveying powders, under vacuum, directly into the sealed mixing tank at rates as high as 500 pounds per minute.
A&B Process Systems
The DCI Dynamixer is designed to mix dry solids, semi-solids or liquids into a slurry or liquid product. This high-speed mixer/blender may also be used to blend, disperse, reconstitute, dissolve, re-hydrate, pre-break or rerun soluble solids, soluble pastes and liquids quickly, efficiently and completely. Insoluble products are dispersed into liquids to make suspensions and slurries with greater stability and homogeneity. Models are available in a variety of shapes, sizes and motor horsepower to fit a broad range of applications.
The APV Flex-Mix Liquiverter is a cost-effective, self-contained unit, designed for flexibility. The technology design can be tailored to meet specific customer requirements for a particular duty. In addition, if market demand changes, the APV Flex-Mix Liquiverter can be adapted for use with a different range of products. The new liquiverter is faster, more powerful and more efficient than ever.
Fristam’s Powder Mixer blends dry and wet ingredients into a fluid stream. This mixing method pulls a consistent amount of vacuum and maintains performance even as product viscosity increases. Benefits include consistent batch-to-batch repeatability, reduced blend times, ease of use, and customizable options. Fristam’s Powder Mixer has 316L stainless steel components standard for contact surfaces and standard wetted surfaces 32 Ra with optional finishes available. Typical applications: crystallized sugar, premixes, pectin, stabilizers, milk-mixes, egg powder, fluid flavorings and starches.
Fristam Pumps USA
The Model 700-TH-20-SSJ Sanitary, Jacketed Rotary Batch Mixer gently blends batches of ingredients in parts as small as one per million with 100% uniformity in less than three minutes, while keeping materials heated or cooled. The mixer can be piped to an in-plant chiller to prevent heat-sensitive bulk products from agglomerating, clumping, degrading, smearing and/or sticking to contact surfaces of mixing and packaging machinery, or to the final consumer packaging, or to an in-plant steam, hot water or hot oil system to maintain elevated material temperatures during processing. The 3-A and USDA compliant unit reportedly evacuates 100% of the batch, and can be sanitized rapidly with no tools.
Munson Machinery Company, Inc.
Other Mixer and Blender Manufacturers:Alfa Laval
Niro Soavi NA
Paul Mueller Co.
East Longmeadow, Mass.
Tetra Pak CPS
Walker Stainless Equipment
New Lisbon, Wis.